Дорогие соклубники!
В связи с тем, что вское stage 1 SDS system будет заменен на stage 2 ( переходим на следующий уровень), было принято решение заменить стоковые поршни на кованые фирмы WEISECO.
Фото и описание:
•Forged aluminum construction which include application-specific alloys to control expansion
•Valve relief size and depth (for over sized valve)
•Hand finished with soft edges
•Anti Detonation suppressors with pressure control grooves above and between the rings on the sides
•Over sized oilers for proper lubrication under hard acceleration
•Perfect stock bore with all the specs included
•Gram scaled to insure proper weight and are match-balanced sets
•Tool steel wrist pins with hone-fitted bores
•Chromoly rings included
•Hardened wrist pin clips included
9.5:1, Bringing the stock compression up from 9:1 to 9.5:1 this application by far is our most popular compression ratio, it can be used as a daily driver and offer excellent performance, it has proven itself up to 373wheel HP (445Crank HP). It is by far the best choice for an over all great running car.
http://www.rippmods.com/products/pro...&productId=138
Далее предстоит установка поршней и обкатка двигателя, и после 1500Км установка stage 2.